wave grenade
Pull the pin and unleash the performance of the Wave Grenade; the new RDM extension.
Precision milled stainless steel release
Uniqu Severne geometry pully alignment for efficient down-hauling
'Automatic' pin and collar system
Available in aluminium at 30cm
HD race extensions
Severne is proud to be offering 3 new extensions to compliment the racing range, 24cm, 36cm.
The 16cm HD Race Extension is to promote compatibility with the Base extension 40 and to shave thoese important grams from your racing set up.
The 24cm and the 36cm HD Race Extensions enable fine tuning with maximum durability.
Base
Ergonomically shaped for easy tightening and un-tightening
Innovative over-moulded outer shell for comfort
EVA covered wear plate for extra friction without over-tightening
Euro pin for compatibility
Power U-Base
• Fin box mast base system with urethane tendon,
used by most professional sailors.
• Universal Pin or MXT release system.
• Low profile.
• Wide surface area contacting board for better
load distribution.
• Grip padded plate for shock absorption and
scratch protection of board deck.
Power m-Base
• Fin box mast base system with urethane tendon,
used by most professional sailors.
• Universal Pin or MXT release system.
• Low profile.
• Wide surface area contacting board for better
load distribution.
• Grip padded plate for shock absorption and
scratch protection of board deck.
One base
- The ONE 1.5 & 2.0 sail require no extension, and the ONE base can be
used directly with the mast. The ONE sails from 2.5 - 3.5 use a combination of a size specific ONE extension and a ONE base.
All ONE sails from 2.5 - 3.5 are sold with the correct ONE aluminum
extension. The base is sold separately. For easy rigging simply put the extension (or the base for the 1.5 & 2.0) into the mast and fit the base into the bottom. Then insert the mast up the sleeve of the sail, downhaul and go! No adjustments to the extension are required.
Adjust. Outhaul Kit
• Allows you to tune your rig as easily while sailing
as you can when on the beach – regardless of the
type of NeilPryde boom you use.
• Maximizes the tuning range of your sails. An
absolute essential for racing or large freerace sails.
• Designed to be used on any X3, X6 or X9 boom.
x3 UXT Extensions
The X3 aluminum extension offers the highest level of durability at the best price-point and is available in the UXT mast base system.
Sizes: 34, 48
x6 MXT Extensions
The MXT system, used in X6 and X-Combat extensions, combines the best features of the ‘classic’
XT and UXT systems with an entirely redesigned downhaul pulley arrangement. This makes the
X6 stronger, more reliable and easier to use. The Clamshell adjustment System allows for greater
tube strength and resistance to sand interference while the large release button on the MXT
Power Base creates a heavy-duty connection between the base and the extension.
Sizes: 14, 34, 48
MXT X-Combat 34 Extension
-
The X-Combat extension is designed for use in conjunction with the X3, X6 and X-Combat reduced diameter wave masts. The X-Combat extension is available in the MXT system.
3d waist pro harness
• Ideal for use in waves and freestyle.
• Maximum dynamic support through NeilPryde’s
3 layer 3D Shaping.
• Non water absorbent PU leather finish for light
weight and durability.
• Closed cell, padded neoprene finished edges for
ultimate comfort.
• Soft EVA foam ribs minimise ride while sailing.
• Moderate height for freedom of movement while
offering support.
• 360° Powerstrap for flex limitation and additional
support.
• Key pocket and waterproof key pouch.
• Elastic Webbing pockets.
• Includes replaceable hook attachment webbing
straps.
Size: S, M, L, XL
3d waist x over harness
• Ideal for use in waves, freestyle, or general
freeride cruising.
• Comfort support through shaping of the harness
and an inside PE Board layer.
• Soft EVA foam ribs minimise ride while sailing.
• Smooth finish neoprene outside edge for comfort.
• Moderate height, a little bit more than the Waist Pro,
means greater freedom of movement while still
offering support.
• 360° powerstrap for flex limitation and additional
support.
• Key pocket and waterproof key pouch.
• Elastic Webbing pockets.
• Includes replaceable hook attachment webbing
straps.
Size: S, M, L, XL
3d Waist Lady
• A purpose made harness with increased shaping
designed to suit the frame of female sailors.
• Smaller fit.
• Ideal for use in waves, freestyle, or general
freeride cruising.
• Maximum dynamic support through NeilPryde’s
3 layer 3D Shaping.
• Non water absorbent PU leather finish for light
weight and durability.
• Closed cell, padded neoprene finished edges for
ultimate comfort.
• Soft EVA foam ribs minimise ride while sailing.
• Moderate height for freedom of movement while
offering support.
• 360° Powerstrap for flex limitation and additional
support.
• Elastic Webbing pockets.
• Key pocket and waterproof key pouch.
• Includes replaceable hook attachment webbing
straps.
Size: S, M
Seat Harnesse X Over
- • Ideal for use in freeride sailing, and for those looking
for increased back support in a seat harness.
• Adjustable hook height and lightweight construction for wide range of use and comfort.
• Adjustable back support straps for increasing back support if necessary.
• Comfort support is provided through the shaping and close fit to the body.
• Inside layer of soft EVA foam ribs on the back, pre-moulded EVA foam ribs around the hips.
• Soft EVA foam ribs minimise ride while sailing.
• Soft neoprene outside edge for comfort.
• Clip in leg straps made of smooth neoprene for minimum wear and maximum comfort.
• Perfect fitting of leg straps made for maximum freedom of movement.
• Key pocket and waterproof key pouch.
• Elastic Webbing pockets.
• Includes replaceable hook attachment webbing straps.
Sizes: M, L
Fixed Harnesse Lines
• Low stretch rope with a tough transparent tube cover.
Size: 18, 20, 22, 24, 26, 28, 30, 32
Vario Harnesse Lines
- • Low stretch rope with a tough transparent
tube cover.
• Neoprene covered adjustment buckle to protect the hands.
• Stiffened PE board to prevent unwanted swing.
• Adjustable length with pull handle for easier function on both sides of the loop. No asymmetrical loop in the shortest length.
Size: 20-24, 26-30
Pro Footstrap
- • Multi-purpose, adjustable footstrap for use
in wave and crossover conditions.
• Classic Velcro closure system - neoprene cover with optional length position.
• Fine yet durable neoprene plus additional foam provides extra comfort.
• High-density webbing sewn to PE stiffener provides good stand-up function.
• Plastic moulding for screw mount and antitwist function.
• Neoprene covered multiple screw hole system.
• 2 pieces per set.
Boom Bra
- • Boom protector for impact protection of
the board and boom lever.
• New shape for closer fitting of the boom head offering greater protection than ever before!
• 3D moulded finish, 1cm foam padding and woven material exterior for improved protection.
• Connection option for Mast Shell.
Mast Base Protector
- • Pre-formed protection for your toes.
• Improved shaping locks protector in place to limit movement and keep it flush on the borad.
• Woven material finish for greater comfort and durability.
Roof Rack Pad
- • Velcro closure for use with oval or round
racks.
• Secure ribbon to keep fabric cover and tubular foam together.
• Two pads per set.
Roof Rack Pad Deluxe
- • Non-slip, abrasion proof strip on the top side.
• Zip closure.
• Fits on different roof racks, especially on the larger “oval” diameter bars.
• Two pads per set.
Heavy Duty Roof Rack Straps
- • Heavy Duty metal buckle for maximum
security.
• Foam padding under buckle for protection.
• Two pieces per set.
Basic Roof Rack Straps
- • Metal buckle for load security.
• Foam padding under buckle for protection.
• Two pieces per set.